AKAG TOY
180-300 FPS 7.3mm Milky White Gel Balls（5 Packs）
180-300 FPS 7.3mm Milky White Gel Balls（5 Packs）
Couldn't load pickup availability
Description:
The milky-white gel pellets are highly flexible and easy to track, making them the ideal choice for gel guns with a rate of fire (RF) below 300 FPS.
Specifications:
Approximately 5000 gel pellets per bag
Average weight: 0.2 grams
Dimensions: Approximately 7.3 mm outer diameter
It is recommended to use milky-white gel pellets with gel bullets having a rate of fire (RF) of no more than 300 FPS. If your gel blasters have a RF exceeding 280 FPS, it is recommended to use extra-hard abrasive gel bullets with a RF exceeding 200 FPS or ultra-hard gel bullets with a RF exceeding 250 FPS. These two types of gel bullets are hard enough to withstand high-speed impacts and are extremely shape-stable, improving accuracy even at high FPS.
Steps to grow the gel balls:
1.Put the gel balls under water for around 2 hours to grow to 7.3-7.5mm in diameter if the inner barrel is 7.5mm
2.Drain away excessive water, but don't dry them completely without any moisture!
3.Fill your mag with the gel balls and start your game!
We Promise
We Promise
- We offer free shipping and tax exemption worldwide. If you are unable to pay or have questions about the payment amount, please contact us.
- If the product or accessory you want to buy is not shown on our website, please send us a message and we will solve it for you as soon as possible.
- Secure payment via Shopify Payments or PayPal.
- We use encrypted SSL certificates to ensure 100% security.
- Customer service responds to messages 24 hours a day.
- 30-day money back guarantee.If you are not completely satisfied with the product for any reason, you can initiate a return within this period.
- Based on past experience, 99% of packages pass through customs smoothly. If your package is unfortunately detained by customs, we will resend it or provide a full refund. We guarantee that our customers will not suffer any loss.
- If you do not have a pleasant shopping experience, please contact us at service@akagtoy.com, we will provide you with satisfactory service and make you 100% satisfied.
Gel Ball Preparation and Use
Gel Ball Preparation and Use
- Soaking Requirements: It is best to use purified water, and sufficient water is essential. Impure water will cause the gel balls to shrink, which can result in reduced range or even inability to shoot.
- Soaking Time: Soak the gel balls for 4-6 hours to ensure full expansion.
- How to Use: Before loading the gel ball into the magazine, drain the water first to prevent moisture from damaging the circuit.
- Storage: After soaking, drain the water and store them tightly sealed. Gel balls that have been soaked for too long or not properly can break or get stuck, making them inoperable.
- 7-8mm super-hard frosted balls are best for electric pistol toys; other sizes break easily.
- Standard Size: 7.15mm - 7.3mm (fits most gel blasters).
Battery Safety and Usage
Battery Safety and Usage
- When using a battery for the first time, fully charge it. Do not charge the battery through the discharge port.
- Use a charger with a voltage balancing function to charge the device.
- If you notice a drop in power during use, discontinue use. Leave approximately 10% of the battery charge in the battery. Do not drain the battery completely to avoid damage caused by over-discharge.
- For gel blasters with electronic speed control or fire control, remove the battery after use to avoid permanent damage.
- The 7.4V battery consists of two cells, and the 11.1V battery consists of three cells. The voltage of a single cell should not be lower than 3.3V or higher than 4.2V. Store the device between 3.8-3.9V for extended periods.
- Overheating of the motor may cause the battery to expand or even ignite. Please inspect your device carefully and use with caution. Do not use the battery if it is damaged or bulging.
- If the battery does not fully charge after a long period of time, use a baby ring to check the voltage of each cell.
- Remove the battery when not in use to extend the life of the transmitter.
Share
