• 3D printed Luban soft bullet gun
  • 3D printed Luban dart gun
  • 3D printed toy gun
  • Product back display
  • Muzzle display
  • Accessories can be added to the top
  • luban-pink-soft-bullet-gun
  • luban-purple-soft-bullet-gun
  • luban-sliver-soft-bullet-gun
  • luban-gray-soft-bullet-gun
  • soft bullet
1 11

AKAG TOY

3D Printed Luban Sponge Soft Bullet Dart Gun-Manual Single Shot Toy Gun

3D Printed Luban Sponge Soft Bullet Dart Gun-Manual Single Shot Toy Gun

$55.99 USD
$55.99 USD
Sale Sold out
Taxes included. Shipping calculated at checkout.
colour

Description:
This 3D printed manual rear-loading dart gun. It uses a metal piston and barrel for greater durability and accuracy. The PETG material used is more durable. The bottom is equipped with a rail for easy installation of accessories.

Don't underestimate this 3D gun, it's very powerful and has a range of 20-25 meters

Features:
1. Manual single shot
2. Metal piston and barrel, high durability and high accuracy
3. Material: 3D printed PETG
4. Ammunition type: Stefan short darts
5. Firepower: 155 FPS

Color Options:
The colors of the three parts can be customized. Please contact our customer service to specify your desired color.
Colors: Red/Blue/Purple/Pink/Orange/Black/Gray/Silver/White/Peach/Mint Green

Packing list:
1* Luban soft bullet gun
10* soft bullets

Note: Please note that this product is made by 3D printing, the internal small parts are metal, the printing materials are PLA+ and PETG (the cost of this material is very expensive), and the time required for 3D printing products is much higher than that of general products, so the price will be relatively more expensive.

We Promise

  1. We offer free shipping and tax exemption worldwide. If you are unable to pay or have questions about the payment amount, please contact us.
  2. If the product or accessory you want to buy is not shown on our website, please send us a message and we will solve it for you as soon as possible.
  3. Secure payment via Shopify Payments or PayPal.
  4. We use encrypted SSL certificates to ensure 100% security.
  5. Customer service responds to messages 24 hours a day.
  6. 30-day money back guarantee.If you are not completely satisfied with the product for any reason, you can initiate a return within this period.
  7. Based on past experience, 99% of packages pass through customs smoothly. If your package is unfortunately detained by customs, we will resend it or provide a full refund. We guarantee that our customers will not suffer any loss.
  8. If you do not have a pleasant shopping experience, please contact us at service@akagtoy.com, we will provide you with satisfactory service and make you 100% satisfied.

Gel Ball Preparation and Use

  1. Soaking Requirements: It is best to use purified water, and sufficient water is essential. Impure water will cause the gel balls to shrink, which can result in reduced range or even inability to shoot.
  2. Soaking Time: Soak the gel balls for 4-6 hours to ensure full expansion.
  3. How to Use: Before loading the gel ball into the magazine, drain the water first to prevent moisture from damaging the circuit.
  4. Storage: After soaking, drain the water and store them tightly sealed. Gel balls that have been soaked for too long or not properly can break or get stuck, making them inoperable.
  5. 7-8mm super-hard frosted balls are best for electric pistol toys; other sizes break easily.
  6. Standard Size: 7.15mm - 7.3mm (fits most gel blasters).

Battery Safety and Usage

  1. When using a battery for the first time, fully charge it. Do not charge the battery through the discharge port.
  2. Use a charger with a voltage balancing function to charge the device.
  3. If you notice a drop in power during use, discontinue use. Leave approximately 10% of the battery charge in the battery. Do not drain the battery completely to avoid damage caused by over-discharge.
  4. For gel blasters with electronic speed control or fire control, remove the battery after use to avoid permanent damage.
  5. The 7.4V battery consists of two cells, and the 11.1V battery consists of three cells. The voltage of a single cell should not be lower than 3.3V or higher than 4.2V. Store the device between 3.8-3.9V for extended periods.
  6. Overheating of the motor may cause the battery to expand or even ignite. Please inspect your device carefully and use with caution. Do not use the battery if it is damaged or bulging.
  7. If the battery does not fully charge after a long period of time, use a baby ring to check the voltage of each cell.
  8. Remove the battery when not in use to extend the life of the transmitter.
View full details