AKAG TOY
Bohan Gen5 SLR 2.0 Metal Gear Electric Toy Gun
Bohan Gen5 SLR 2.0 Metal Gear Electric Toy Gun
Couldn't load pickup availability
Description:
Semi-Auto: Fires a single round with each trigger pull. Ideal for precision single-shot firing; the trigger must be pulled again for each subsequent shot.
Full-Auto: Fires continuously as long as the trigger is held down, stopping only when the trigger is released or the ammunition runs out. Suitable for suppressive fire and rapid-fire sweeping.
Mag Priming: Uses a charging handle or button to feed gel balls/soft darts into the feed port before firing. This eliminates the issue of the first shot firing "dry" (empty chamber), allowing for immediate action.
Bolt Hold Open: The bolt or slide automatically locks in the rear position after the last round is fired. This serves as a reminder to reload and offers the experience of realistic tactical reloading.
Blowback: The slide or bolt on top of the gun cycles rapidly back and forth synchronously with each trigger pull. This significantly enhances the mechanical feel and simulates realistic recoil during firing.
Metal Parts: Metal gears, metal piston rack, metal buffer tube, metal magazine, metal inner/outer barrels, metal charging handle, metal return spring plate, metal sling mount, metal trigger, metal fire selector, metal magazine release, metal bolt release,metal buffer tube.
Features:
1. Mag priming, bolt hold open, blowback function
2. Detachable accessories, bottom-fed magazine
3. Material: Nylon + metal
4. Firing modes: Semi-automatic/Full-automatic
5. Range: 20-30 meter
6. Ammunition type: 7-8mm gel ball
7. Battery type: Tamiya connector
8. Aize: 71*22*7cm
9. Weight: 2.0 kg
Packing List:
1* Bohan SLR V5 Toy Gun
1* Metal magazine
1* Muzzle cap
2* Iron sights
1* Grip
1* Goggles
1* 7.4V Rechargeable battery
1* USB charging cable
1* Gel balls (10,000 rounds)
We Promise
We Promise
- We offer free shipping and tax exemption worldwide. If you are unable to pay or have questions about the payment amount, please contact us.
- If the product or accessory you want to buy is not shown on our website, please send us a message and we will solve it for you as soon as possible.
- Secure payment via Shopify Payments or PayPal.
- We use encrypted SSL certificates to ensure 100% security.
- Customer service responds to messages 24 hours a day.
- 30-day money back guarantee.If you are not completely satisfied with the product for any reason, you can initiate a return within this period.
- Based on past experience, 99% of packages pass through customs smoothly. If your package is unfortunately detained by customs, we will resend it or provide a full refund. We guarantee that our customers will not suffer any loss.
- If you do not have a pleasant shopping experience, please contact us at service@akagtoy.com, we will provide you with satisfactory service and make you 100% satisfied.
Gel Ball Preparation and Use
Gel Ball Preparation and Use
- Soaking Requirements: It is best to use purified water, and sufficient water is essential. Impure water will cause the gel balls to shrink, which can result in reduced range or even inability to shoot.
- Soaking Time: Soak the gel balls for 4-6 hours to ensure full expansion.
- How to Use: Before loading the gel ball into the magazine, drain the water first to prevent moisture from damaging the circuit.
- Storage: After soaking, drain the water and store them tightly sealed. Gel balls that have been soaked for too long or not properly can break or get stuck, making them inoperable.
- 7-8mm super-hard frosted balls are best for electric pistol toys; other sizes break easily.
- Standard Size: 7.15mm - 7.3mm (fits most gel blasters).
Battery Safety and Usage
Battery Safety and Usage
- When using a battery for the first time, fully charge it. Do not charge the battery through the discharge port.
- Use a charger with a voltage balancing function to charge the device.
- If you notice a drop in power during use, discontinue use. Leave approximately 10% of the battery charge in the battery. Do not drain the battery completely to avoid damage caused by over-discharge.
- For gel blasters with electronic speed control or fire control, remove the battery after use to avoid permanent damage.
- Overheating of the motor may cause the battery to expand or even ignite. Please inspect your device carefully and use with caution. Do not use the battery if it is damaged or bulging.
- Remove the battery when not in use to extend the life of the transmitter.
Share
